Effivity Management System Modules Overview
User Guide | Choosing QMS, HSE, FSMS, ISMS and Understanding Enabled Features
This guide explains how management system areas are organized in Effivity and how users can choose the correct module for their work. It is intended for compliance teams, process owners, department users, System Admins, and general users who need a clear understanding of the menu structure. Normal navigation and record work take place in the main account; process-artifact configuration follows the sandbox sequence described in Section 9.
NOTE: The menus shown in this guide are examples. Each user may see different modules based on subscription features, organization configuration, and role access assigned by the System Admin.
Effivity can support multiple management system areas in one account. Select All in the top navigation to see the available groups in the left panel. QMS, HSE, FSMS and ISMS help teams organize records by process. Modules, Masters and Reports are separate tabs in the left panel; shared areas such as Task and integrated processes depend on the organization’s configuration.

Figure 1: All selected on a normal dashboard, showing QMS, HSE, FSMS and ISMS in the left navigation, with Help and Support Ticket at the bottom.
The table below gives a practical explanation of each area. It is not a replacement for your organization procedure, but it helps users decide where to begin.
Area | What it supports | Typical examples |
QMS | Quality Management System | Quality records, document control, non conformity, internal audit, risk, objectives, management review and compliance obligations. |
HSE | Health, Safety and Environment System | Safety observations, environmental controls, waste management, HSE planning, operations, and performance evaluation. This area can support EMS and OHSMS activities where configured. |
FSMS | Food Safety Management System | Food safety planning, prerequisite programs, hazard control, CCP management, OPRP management and recall records. |
ISMS | Information Security Management System | Information assets, security risks, security controls, security incidents and business continuity process records. |
IMS | Integrated Management System | Shared or integrated processes used across more than one standard, depending on how the organization has configured Effivity. |
Select QMS in the top navigation to display its module groups in the left panel. Use QMS when the activity is related to quality management or quality compliance. This example includes Admin, Communication, Context Of Organisations, Risk And Opportunity, HR, Marketing, Design And Development, Purchase, Operations, Policy And Objective, Quality, Documented Information, Non Conformance, Internal Audit, MRM and Compliance Obligation. Expand the required group to open its sub-modules.
Common QMS work includes approved document control, internal audit records, risk reviews, quality objectives, non conformity records and management review inputs.

Figure 2: QMS selected in the top navigation, showing quality-related module groups, including Compliance Obligation.
Select HSE in the top navigation for health, safety or environmental management. HSE can support EMS and OHSMS requirements when configured by the organization.
The example menu shows HSE Planning, Waste Management, HSE Operations and Performance Evaluation. Expand the required group to open its sub-modules. Users working on safety, environment or workplace risk records can begin here when their organization manages that process under HSE.

Figure 3: HSE selected, showing HSE Planning, Waste Management, HSE Operations and Performance Evaluation.
Select FSMS in the top navigation for food safety management. This area is meant for teams who manage food safety plans, prerequisite programs and food safety controls.
The example menu shows FSMS Planning, FSMS PRP, FSMS Hazard Control, CCP Management, OPRP Management and Recall. Expand the required group to open its sub-modules.

Figure 4: FSMS selected, showing planning, PRP, hazard control, CCP, OPRP and Recall module groups.
Select More in the top navigation, then expand ISMS in the left panel. Use ISMS for information security management and records linked to information assets, risks, controls, incidents and business continuity.
The example menu shows ISMS Assets, ISMS Risk, ISMS Controls, ISMS Incidents and Business Continuity Process. Expand the required group to open its sub-modules.

Figure 5: More selected and ISMS expanded, showing information security and business continuity module groups.
Choose the management system area that matches your organization’s process. QMS is used for quality and compliance records; HSE, FSMS and ISMS are used when the work belongs to safety and environment, food safety or information security. Use the examples below as a practical decision guide.
When you need to... | Start with... |
Create or review a quality document, procedure, policy or objective | QMS |
Record a customer complaint, non conformity or corrective action | QMS |
Work on safety, environment, waste, HSE operations or performance evaluation records | HSE, when the process is managed under HSE |
Work on food safety planning, PRP, hazard control, CCP, OPRP or recall records | FSMS, when the process is managed under food safety |
Work on information assets, security risks, controls, incidents or business continuity records | ISMS, when the process is managed under information security |
Review records assigned to you for action | Task or Workflow Notifications |
View dashboard information or reports | Dashboard or Reports |
Cannot find the required module | Contact the System Admin to confirm access and configuration |
TIP: Follow your organization’s procedure when choosing a module. Where a process supports more than one standard, the organization may configure it under IMS or another shared area.
Effivity separates feature availability from user access. Subscription features show which management system areas are enabled in the environment. User access decides what an individual user can see and perform.
The Subscription screen is a reference area for authorized users and System Admins. Select Admin in the top navigation, then Subscription in the left panel. Most end users do not need this screen for daily work.

Figure 6: Admin selected, with Subscription in the left navigation highlighted.
Open the Subscription Features tab. Under Included Modules, review the management system feature names and their indicators in the Select column. This example shows Quality Management System, Health, Safety and Environment System, Food Safety Management System and Information Security Management System as included.

Figure 7: Manage Subscription page with Subscription Features selected and the four management system features included.
NOTE: If a module is missing, users should contact the System Admin first. If the feature is not enabled in the subscription, the System Admin can coordinate with Effivity support.
An organization can use more than one management system in the same Effivity environment. For example, QMS, HSE, FSMS and ISMS can be active together when the subscription and configuration support them.
This helps teams manage different compliance areas while still using shared Effivity capabilities such as workflows, records, dashboards, reports, search, access control, audit details and history tracking.
Process-artifact changes such as forms, workflows and masters are configured inside their existing process in sandbox. Administrators open Admin > Process, select Switch to Sandbox, save the artifact, use Start Testing, and verify the change. They then select Publish, review the Process Publish Wizard, select Publish Now and confirm Yes.
Publish the changes to make it live in the main account. Return using Back to Main Account and verify the published behavior. Viewing menus, reading records and checking subscription features do not require switching to sandbox.
NOTE: Using multiple standards in one environment does not mean every user will see every module. Visibility still depends on the access assigned to that user.
Question | Answer |
What is the difference between IMS and QMS, HSE, FSMS or ISMS? | IMS is generally used for shared or integrated processes. QMS, HSE, FSMS and ISMS are specific areas used for their respective management system records. |
Why do I see fewer modules than another user? | Your menu depends on both subscription features and role access. Another user may have a different role or responsibility. |
Does HSE cover EMS and OHSMS? | In this setup, HSE is used for health, safety and environment processes. It can support EMS and OHSMS related activities where configured. |
Can one company use QMS, HSE, FSMS and ISMS together? | Yes. Multiple management system areas can be available in the same Effivity environment when enabled and configured. |
Do end users need to check the Subscription screen? | Usually no. End users normally work from Dashboard, Task, Reports or the relevant module. Subscription is mainly a reference screen for authorized users. |
Who can activate additional standards or features? | Feature activation is controlled through subscription and setup. System Admins can coordinate with Effivity support when additional features are required. |
What should I do if I am not sure which module to use? | Use the area specified by your organization’s procedure: QMS for quality, HSE for safety and environment, FSMS for food safety, or ISMS for information security. Ask the System Admin if the process location is unclear. |
What should I do if the module is not visible? | Contact the System Admin. The module may not be assigned to your role or the feature may not be enabled for your environment. |
QMS, HSE, FSMS and ISMS help users work in the correct management system area. HSE can support EMS and OHSMS related processes where configured. Subscription features define what is enabled in the environment, while role access defines what each user can see and perform.
For daily work, use the management system area specified by your organization’s process. If a required module is not visible, contact the System Admin to confirm access, configuration and feature availability.
We hope you find this document helpful!