Searching and Retrieving Records in Effivity
Knowledge Base Article | Record Search and Status Tracking
Applies to: All Effivity users
ABSTRACT
This guide explains how to search for records in Effivity, apply filters, retrieve past submissions, and check the status of submitted records using list views, search options, workflow notifications, and record action menus.
Step 1: Open the required module
Search and retrieval starts from the module where the record was created or submitted. For example, document records are searched from the Documents list, while non conformance records are searched from the Non Conformance list.
1. Navigate to the required module from the left navigation menu. Quick Find can locate Documents; choose the entry under Modules rather than the similarly named report.
2. Confirm that the correct list screen is displayed.
3. Use the magnifying-glass Search control on the list toolbar to open the search window.

Figure 1: Documents list with the Search control and procedure PLAN1002 in the result grid.
NOTE: The available records depend on the module, the selected view, and the access permissions assigned to the user.
Step 2: Use the Search window
The Search window allows a field-based search. Its fields vary by module. The Documents example includes Document Number and Approval Status.
1. Click the search icon on the list toolbar.
2. Enter known information such as document number, department, document type, approval status, or other available details. This example uses PLAN1002 and Pending.
3. Click Search to display matching records.
4. Use Clear Search to remove entered search values. Check the selected view and any remaining advanced conditions after returning to the list.
Figure 2: Documents Search window with Document Number PLAN1002, Pending approval status, Search, and Clear Search.
Step 3: Review search results and applied filters
After a search is performed, Effivity displays the matching records in the list screen. The applied search criteria are shown above the list so users can understand why the result is filtered.
1. Review the search criteria shown above the list.
2. Check the records displayed in the result grid.
3. Check the total count shown at the bottom of the list.
4. Remove an individual editable search criterion with its close control, or reopen Search and select Clear Search. Advanced and view conditions may still restrict the list.

Figure 3: Filtered Documents result for PLAN1002 and Pending; the listing footer shows one matching record.
NOTE: If the expected record is not displayed, verify the correct module, view, and search criteria before raising an access request.
Step 4: Open a retrieved record from the action menu
Each record has an action menu. Users can use this menu to open the record or perform actions that are available to them.
1. Click the action menu icon next to the record.
2. Select View to open the record. A submenu or Print action may be available when configured.
3. Select Print when the print option is available.
4. Use History to review previous logs or changes, if the option is available.
5. Use other options only when they are visible and relevant to the user role.

Figure 4: Documents revision action menu showing View, History, and View Parent Record for PLAN1002.
NOTE: Action menu options depend on user permissions. Some users may only have View or Print, while administrators or authorized users may have options such as Edit, Change Request, Archive, or Unarchive.
Step 5: Use views to retrieve different categories of records
Views show different categories of records in the same module. In this Documents example, the Views submenu contains Default, Archived, Rejected, Pending - Change requests, and Draft.
1. Click the current view, shown as Default beside Documents, then point to Views to expand its submenu.
2. Select the required view.
3. Review the records displayed in that view.
4. Switch back to Default when the category-specific review is complete.

Figure 5: Expanded Documents Views submenu showing the five available view choices.
NOTE: The views available to each user may vary based on access permissions and configuration.
Step 6: Find past submissions using Workflow Notifications
Workflow Notifications can help locate records waiting for action or linked to completed tasks. Open the individual notification icon in the upper-right header to preview tasks and access the pending and completed lists.
1. Open the individual notification icon in the upper-right header.
2. Review the pending task preview and its linked record details, or select Pending Notification for the full list.
3. Select Completed Notification to review tasks you have already actioned.
4. Use the refresh icon in the preview if its tasks need updating.

Figure 6: Documents page with the individual notification preview for PLAN1002 and the pending and completed list links.
Step 7: Search inside Workflow Notifications
The full Workflow Notifications list has its own Search option. It searches task fields such as Process Name, Workflow Name, Step Name, and Status; it is separate from the Documents record search.
1. Open Pending Notification from the individual notification preview and select Search in the list toolbar.
2. Enter the process or workflow details that you know.
3. Select a status when required.
4. Click Search to display matching notifications.
5. Use Clear Search to remove the notification search criteria.

Figure 7: Workflow Notifications Search with Process Name Documents, task fields, and Clear Search.
Step 8: Open or complete a workflow notification
A pending notification can offer View Record and Complete Step. The available actions depend on the task and user role.
1. Click the action menu for the required workflow notification.
2. Select View Record to review the linked record.
3. Select Complete Step when you intend to perform the assigned task.
4. Follow the workflow form or task instructions shown on the screen.

Figure 8: Workflow Notifications page showing View Record and Complete Step for the PLAN1002 Reviewal task.
IMPORTANT: Complete should be used only when the user has reviewed the task and is ready to proceed with the workflow action.
Step 9: Check record status from the record action menu
For workflow-enabled records, the row menu may expose Status or Current Status. This section uses Non Conformance S No 10, a QA calibration finding, because its Status action is configured. The pending Documents revision shown earlier has no Status action in its row menu.
1. Open the required module list. For this example, open Non Conformance and search S No 10.
2. Click the action menu for the submitted record.
3. Select Status or Current Status when it is available.
4. Review the workflow status window to understand the current stage of the record.

Figure 9: Status action for Non Conformance S No 10, a QA calibration finding.
NOTE: Status appears only when it is configured for the process and available to the user.
Step 10: Understand the workflow status diagram
The workflow status diagram shows the record’s progress through its configured stages. Non Conformance S No 10 has completed its creation steps and has NC Follow Up in progress.
1. Review the workflow diagram and follow its connectors through the possible paths.
2. Use the legend to identify Completed (green), In-Progress (blue), and Pending (white) stages.
3. Identify the current stage. In this example, NC Follow Up is in progress; later corrective-action and closure steps are pending.
4. Close the status window after review. Use History for an event-by-event record trail when available.

Figure 10: Non Conformance S No 10 Workflow Status, with the legend and NC Follow Up in progress.
Step 11: Understand why status may or may not appear in the list
Some processes show a status column in the list; others provide Status or Current Status through the record action menu. Check the actual label and configuration for the process.
1. If status is visible in the list, review the status column directly.
2. If the workflow stage is not visible in the list, select Status or Current Status from the row menu when available.
3. If the action is needed, ask a System admin to open Sandbox account > Admin > Process, open the existing process, and review Process Configuration > Record Views in its Artifacts workspace. A record action can be mapped to Workflow Status. A list status column is a separate index-view setting. After publishing the process, it shall reflect in the main account.

Figure 11: Non Conformance Artifacts > Process Configuration > Record Views, with Status mapped to Workflow Status.
NOTE: This is an admin configuration point. End users can ask the System admin to review status visibility; the admin should use the existing process.
TROUBLESHOOTING TIPS
1. If no records are displayed, clear the search and try again with fewer filters.
2. If a record was submitted earlier, check configured views such as Draft, Pending - Change requests, Rejected, or Archived.
3. If the record is part of a workflow, check Pending Notification or Completed Notification from the individual notification menu.
4. If the record or Status action is missing, ask the administrator to check access, the record’s workflow stage, and process configuration.
5. If the issue continues, contact the System admin with the module name, record number if known, screenshots, and the action you are trying to perform.
NOTE: Search results, view options, workflow notifications, and status visibility may vary based on module configuration and user access permissions.