
A plant with eight critical control points, checked every hour across two shifts, usually records about 128 readings a day. Over a year of daily production, that comes to more than 46,000 entries. On paper, every one of those entries has to be legible and signed. Each one also has to be findable when an auditor asks.
A Hazard Analysis and Critical Control Points (HACCP) monitoring system is how you capture those readings and prove each limit was met.Digital HACCP tools record each check at the line instead of on paper.
This guide covers how to set up HACCP monitoring procedures, how HACCP compares with ISO 22000, and how HACCP monitoring software helps you go paperless before 2027.
A HACCP Monitoring System Proves Each Critical Control Point Stayed Within Its Limit
A HACCP monitoring system is the set of planned checks and records that show each critical control point (CCP) stayed within its critical limit. Under HACCP, systematic monitoring of hazard controls happens during every production run.
Monitoring is the fourth of the seven HACCP principles. The first three principles identify the hazards, the control points, and the limits. Monitoring is where your team checks those limits on the line, shift after shift.
Monitoring usually has three jobs:
- It detects a deviation early enough to hold the affected product.
- It tells your team when to act, such as holding a batch and re-cooking it when a temperature check fails.
- It produces a dated, signed record an auditor can review.
If a critical control point is not monitored, you have no evidence that its limit was met.
Establishing Monitoring Procedures Starts With Deciding What to Check and How Often
Every CCP in your HACCP plan needs a written monitoring procedure. Under the HACCP guidelines from the US National Advisory Committee on Microbiological Criteria for Foods (NACMCF), that procedure answers four questions:

- What will be checked? This is the measurement tied to the critical limit, such as the core temperature of a cooked product.
- How will it be checked? This names the tool or method, such as a calibrated probe thermometer or a metal detector test piece.
- How often will it be checked? This can be every batch, every hour, or continuously by a sensor.
- Who will check it? This is a named role, such as the line operator or a quality technician, trained for that task.
HACCP also requires you to keep a record of every check. The record shows the reading, the time, and the person who took it.
The table below shows a sample monitoring plan for three common CCPs. The limits are examples. Your own limits must come from your hazard analysis and validation.
CCP | Critical limit (example) | How it's checked | How often | Who checks | Record |
Cooking | Core temperature of at least 165°F (74°C) | Calibrated probe thermometer in the thickest part | Every batch | Line operator | Cook log |
Chilling | From 135°F (57°C) to 70°F (21°C) within 2 hours, then to 41°F (5°C) within 4 more hours | Probe thermometer at set intervals | At the start of cooling, at 2 hours, and at 6 hours | Line operator | Cooling log |
Metal detection | Detector rejects ferrous, non-ferrous, and stainless steel test pieces of the sizes set in your plan | Test pieces passed through the detector | At the start of each shift, every hour, and at the end of each shift | Quality technician | Metal detector log |
HACCP vs ISO 22000: HACCP Is a Method, and ISO 22000 Is the Management System Built Around It
HACCP is a method for controlling food safety hazards at specific points in production. It was first developed in the 1960s to make food safe for the US space program. Its seven principles are now set out by the Codex Alimentarius, the international food standards program run by the Food and Agriculture Organization (FAO) and the World Health Organization (WHO). In the US, HACCP plans are required by law for meat, poultry, seafood, and juice.
ISO 22000:2018 is an international standard for a complete food safety management system. It includes all seven HACCP principles. It also adds requirements that HACCP on its own does not cover:

- Written prerequisite programs, such as cleaning, pest control, and personal hygiene
- A food safety policy and objectives approved by top management
- Scheduled internal audits and management reviews
- Control of documents and records across the whole system
- Communication with suppliers, customers, and regulators
ISO 22000 is certified by accredited certification bodies. On its own, it’s not recognized by the Global Food Safety Initiative (GFSI). Large retailers usually ask for a GFSI-recognized certification, such as FSSC 22000, BRCGS, or SQF. FSSC 22000 builds on ISO 22000 and adds extra requirements.
The ISO 22000 vs HACCP guide compares the two in more detail.
Paper HACCP Logs Hide Problems Until It Is Too Late to Act
1. Entries Get Filled In After the Fact
A busy operator may skip a check and write the reading in at the end of the shift. Auditors look for the signs. These include identical readings, the same pen throughout, and neat handwriting on a wet production floor.
2. Deviations Wait in a Binder
Out-of-range readings need quick action. If they are recorded only on paper, the problem may not be found until after the batch has shipped.
3. Records Get Lost or Damaged
Paper logs can tear, get wet, or go missing. A missing page means part of your record is missing too.
4. Finding Old Records Takes Hours
An auditor may ask for six months of cooling logs. Someone has to search through boxes to find them.
5. Trends Stay Invisible
A chiller can slowly get warmer without any single reading falling outside the limit. You may only spot the problem when you look at the readings over time.
A Phased Rollout Gets Your HACCP Monitoring Off Paper Before 2027
Instead of waiting for someone to review a log, digital checks flag problems as soon as they occur. Each reading is time-stamped, and out-of-limit results trigger an alert.
Digital rollout works better when you build it step by step. Start with one production line and use it to identify problems before expanding across the site. Define what needs to be working before each phase is complete.
Phase | What you do | Move to the next phase when |
1. Pilot | Move one CCP on one line to digital checks. Run the paper log alongside it. | Operators log every check digitally for around two straight weeks, and the digital record matches the paper one. |
2. Expand | Add the remaining CCPs on the site, shift by shift. Train each operator before their first digital check. | Every CCP is logged digitally, and no paper entries are needed to fill gaps. |
3. Retire paper | Stop printing paper logs. Archive the old ones for the retention period your regulator or customers require. | Your next internal audit is completed using digital records only. |
Phase 1 usually exposes small problems. Common ones are tablets that don't work in cold rooms, check times that clash with breaks, and operators unsure what to do when a reading fails.
The manual vs. digital comparison covers what changes for your team after the switch.
In Effivity, a Failed CCP Reading Starts the Corrective Action Automatically
Effivity's HACCP software holds your CCPs and their critical limits in one place. Monitoring checks are scheduled in the system. Readings can be entered by operators or captured live from connected sources.
When a reading falls outside its limit, Effivity sends an alert. It then triggers the corrective action linked to that CCP. The deviation is logged as a non-conformance. The corrective action is tracked until it is closed.
Every entry carries a time stamp. Your internal audits can draw on the same records, using pre-configured checklists.
Visit the Effivity website to see how HACCP monitoring works in practice.
Frequently Asked Questions
What is a HACCP monitoring system?
A HACCP monitoring system is the set of planned checks and records that show each critical control point stayed within its limit during production.
How often should CCPs be monitored?
Your hazard analysis sets the frequency for each CCP. Cooking is often checked every batch. Chillers are often monitored continuously by sensors.
Can ISO 22000 replace HACCP?
ISO 22000 includes all seven HACCP principles, plus the wider management system around them. Certification does not replace a HACCP plan your regulator requires. For example, US meat and poultry plants must still meet USDA HACCP rules.